If they're using my data, the least they could do is provide free backup.
The City Built From Underground
Observations from a programmer in the Steel City.
Thursday, February 27, 2014
Tuesday, February 11, 2014
Friday, July 26, 2013
Microsoft in the Window 8 Era
It's almost as if Microsoft is determined to confuse the consumer and alienate business customers.
I don't know how else to describe Windows 8.
With Windows 7 Microsoft had a hit on its hands. It had an updated user interface that had worked all the Vista bugs and didn't require more power than Vista did just to run. Most importantly, it had a user interface that Business had finally grown to accept.
Leaving the Playschool colors of XP behind had been a good thing. Windows 7 managed to look much more sophisticated than its predecessors. Windows 8 changed that.
Windows 8 is almost a different product. Something not intended for either of the core users of Windows 7, home users or business users.
It appears that Microsoft has still not learned from the past. Windows 8 is the same everywhere. Windows 8 is the same even when it's not the same OS! It's a compromise that has gone too far.
I don't know how else to describe Windows 8.
With Windows 7 Microsoft had a hit on its hands. It had an updated user interface that had worked all the Vista bugs and didn't require more power than Vista did just to run. Most importantly, it had a user interface that Business had finally grown to accept.
Leaving the Playschool colors of XP behind had been a good thing. Windows 7 managed to look much more sophisticated than its predecessors. Windows 8 changed that.
Windows 8 is almost a different product. Something not intended for either of the core users of Windows 7, home users or business users.
It appears that Microsoft has still not learned from the past. Windows 8 is the same everywhere. Windows 8 is the same even when it's not the same OS! It's a compromise that has gone too far.
Tuesday, May 21, 2013
Thursday, April 25, 2013
Surface Tension
A great picture of a wasp standing on the surface of the water. You can see the lensing of the light as it passes through the distorted surface.
Monday, April 15, 2013
Pipe
In order to better serve our customers please observe the following list of pipe
recommendations for waterlines and similar while on site.
The following list is only offered as a general guide for pipe selection:
1. All pipe is to be made of a long hole and surrounded by metal or plastic centered around the hole.
2. All pipe is to be holed throughout the entire length. Do not use holes of different length than the pipe.
3. The I.D. (Inside Diameter) of all pipe must not exceed the O.D. (Outside Diameter), otherwise the hole will be on the outside.
4. Pipe is to be supplied with nothing in the hole so that water, steam, etc. can be put inside at a later date.
5. All pipe is supplied without rust as the required amount can be easily applied at the job site. (Note: Some vendors are now able to supply pre-rusted pipe. If available in your area, this new product may save time at the job site.)
6. Long pipe, over 500ft (153m), in length should have the words "LONG PIPE" clearly painted on each end so crew will know it is a long pipe.
7. Pipe over two miles (3,2 km) in length must also have the words "LONG PIPE" painted in the middle so the crew will not have to walk the entire length of the pipe to determine whether it is a long pipe or short pipe.
8. Pipe over 6in (152mm) in diameter must have the words LARGE PIPE painted on it so the crew will not mistake it for a small pipe.
9. Flanges should be used on all pipe. Flanges must have holes of equal diameter for bolts. Flange holes must remain separate from the big hole in the middle.
10. When ordering 90 deg., 45 deg., or 30 deg. elbows be sure to specify right-hand or left-hand bends, otherwise you will end up going in the wrong direction.
11. Specify to your vendor whether you want level, up-hill, or down-hill pipe. If you use down-hill pipe for going up-hill the water will flow the wrong way.
12. All couplings should have either right-hand or left-hand threads. Do not mix the threads. Mixed threads will cause a problem where as one coupling is being screwed on the pipe it will be unscrewed from the other.
The following list is only offered as a general guide for pipe selection:
1. All pipe is to be made of a long hole and surrounded by metal or plastic centered around the hole.
2. All pipe is to be holed throughout the entire length. Do not use holes of different length than the pipe.
3. The I.D. (Inside Diameter) of all pipe must not exceed the O.D. (Outside Diameter), otherwise the hole will be on the outside.
4. Pipe is to be supplied with nothing in the hole so that water, steam, etc. can be put inside at a later date.
5. All pipe is supplied without rust as the required amount can be easily applied at the job site. (Note: Some vendors are now able to supply pre-rusted pipe. If available in your area, this new product may save time at the job site.)
6. Long pipe, over 500ft (153m), in length should have the words "LONG PIPE" clearly painted on each end so crew will know it is a long pipe.
7. Pipe over two miles (3,2 km) in length must also have the words "LONG PIPE" painted in the middle so the crew will not have to walk the entire length of the pipe to determine whether it is a long pipe or short pipe.
8. Pipe over 6in (152mm) in diameter must have the words LARGE PIPE painted on it so the crew will not mistake it for a small pipe.
9. Flanges should be used on all pipe. Flanges must have holes of equal diameter for bolts. Flange holes must remain separate from the big hole in the middle.
10. When ordering 90 deg., 45 deg., or 30 deg. elbows be sure to specify right-hand or left-hand bends, otherwise you will end up going in the wrong direction.
11. Specify to your vendor whether you want level, up-hill, or down-hill pipe. If you use down-hill pipe for going up-hill the water will flow the wrong way.
12. All couplings should have either right-hand or left-hand threads. Do not mix the threads. Mixed threads will cause a problem where as one coupling is being screwed on the pipe it will be unscrewed from the other.
Saturday, April 13, 2013
Subscribe to:
Posts (Atom)